Module Description
OSL-ZB2530PB is an embedded wireless communication module based on IEEE 802.15.4/ZigBee technology,whose hardware adopts TI's CC2530[1] chip solution, and the software is the EZ-ZB2530 AT command set developed by us on the basis of the protocol stack of 1a[2]. Z-Stack-CC2530-2.5 which officially released by TI.
Advanced hardware design and concise AT command interface enable OSL-ZB2530PB ZigBee wireless communication module to be integrated into a wide range of applications.
Due to the powerful configuration function of the OSL-ZB2530PB AT command set, you can develop products without additional MCU, thus saving more time and cost. In addition, OSL-ZB2530PB ZigBee wireless communication module can be used as an ideal platform for ZigBee firmware development besides providing customized firmware.
No need for any RF experience and professional RF knowledge to add this powerful network function to your product,which will greatly shorten the product development time and accelerate marketing of your product.
Module Features
- Mini 24-pin stamped SMT package
- On-board integrated PCB (sniffer) antenna
- Small size package: 16mm*21.1mm*3.7mm
- Passed the EU CE0168 and EU ROHS certification
- Based on the 8051 Single-Chip Microcomputer architecture
- 256K of FLASH and 8K of RAM
- Support three sleep modes: PM1, PM2, PM3
- Operating voltage range: 2.0V~3.6V
- Can be used as a coordinator, router and terminal device
- Provide 7 universal GPIOs (including 3 analog ADCs)
- Provide UART serial communication interface
- The firmware can be upgraded through the serial port
- Support AES-128 encryption
- Storage temperature: -40℃~125℃
- Operating temperature range: -40℃~85℃
- Corrosion and moisture resistant
- Excellent anti-interference ability
- Excellent networking stability
- Fast network data processing capability, in a ZigBee network structure composed of 100 nodes, data collection of all nodes can be completed in only 12 seconds
- Support serial port data transmission and reception in low power consumption mode of terminal equipment
- Support commands to remotely control other modules in the network
- Support ZigBee channel scanning and PANID scanning
- Support instructions to analyze the current network topology
- Support command to update network key
- Support commands to get neighbor table, routing table, node description information
- Support switch to current network channel with command
- Provide a wealth of module registers to facilitate user use, provide timers, interrupts, etc. to perform user built-in functions
- Support the scanning of environmental energy values, which is convenient for users to check the signal interference intensity of the network channel
- Support Zigbee multicast function
- Support Zigbee binding function
- Provide Osmartlink Terminal developed based on ZigBee PRO feature set
- Standard JTAG programming and real-time online debugging can be carried out through IAR
Application Field
- Smart grid
- Smart energy
- Wireless alarm
- Safe family
- Smart home
- Smart building
- Smart agriculture
- Wireless sensor network
- M2M industrial control
- Lighting and ventilation control
- Remote monitoring
- Environmental monitoring & control
